Price: $5,495.00


The Armasight CO-LR (Clip On – Long Range) is a Night Vision unit that mounts in front of an existing day scope, and converts the day scope to night vision capability up to ranges of 1000 yards. Suitable for use with most commercial and military specification day time sights, telescopes or binoculars (up to 12X magnification), the CO-LR can be mounted/dismounted on a standard Picatinny rail in seconds, and with no tools required. Because the CO-LR is mounted in front of your own day scope, the shooters eye relief is not altered, and shot release and follow through all remain intuitive – because the unit is factory bore-sighted to better than 1MOA accuracy, no alteration in zero is experienced, so it really is as simple as mount-focus-shoot, just as in day time.
The Armasight CO-LR is intended primarily for use by the most demanding hunter or long range target shooter, but with a build quality that makes it capable of so much more -its MIL-STD-810 housing is designed to take just about anything the great outdoors can throw at it. The CO-LR is packed with innovative features like variable gain control, bright light shut-off, wireless remote control. This night vision clip on is designed to make long range night shooting just as easy and accurate as shooting over the same terrain during daylight hours with your day scope alone.
Whether your day scope is a well known brand or not, the Armasight CO-LR will work just as well at magnifications anywhere from 3X to 12X. The Armasight CO-LR is available in a variety of high performing Gen 2+ and Gen 3 image tube options to cater for all budgets; the CO-LR brings very high quality clip-on night vision within everyone’s reach.

FEATURES

Converts your daytime scope, sight, or binoculars into night vision devices
Mounts in front of any day scope with no re-zeroing required
Wireless remote control
Manual gain control for the best possible image contrast in both high and low light conditions (CO-LR MG model)
Powered by a single AA or CR123A battery
Low battery LED indicators appear in the viewing area of the CO-LR
Bright light cut-off system
Automatic shut-off system
Filled with dry nitrogen to prevent internal fogging
Mounts on Picatinny/ Weaver rail with a quick release mount
Mounts on weapons using a short Picatinny/ Weaver rail with the optional FSRS system
Long-range XLR-IR850 illuminator
Mil Standard compliant
Limited two-year warranty

SPECIFICATION

IIT Generation – 3P High-Performance Thin-Filmed Auto-Gated IIT MG
Resolution  – 64-72 lp/mm
Magnification  – 1x (recommended to use with up to 10x day time optics)
Photocathode Type  – GaAs
Lens System  – F/1.54; 108 mm
Field of View  – 9°
Focus Range  – 10m to Infinity
Exit Pupil Diameter  – 40 mm
Remote Control  – Wireless
Manual Gain Control  – Yes
Bright Light Cut-off  – Yes
Automatic Shut-off System –  Yes
Low Battery Indicator –  Yes
Infrared Illuminator  – Detachable Long Range IR Illuminator
Power Supply  – Single AA (1.5V) or CR123A (3V)
Battery Life  – 45 hrs (3V) / 25 hrs (1.5V)
Environmental Rating –  Water and Fog-Resistant / Waterproof (optional)
MIL-STD-810  – Yes
Operating Temperature -40° to +50 °С (-40° to 122 °F)
Storage Temperature -50° to +50 °С (-58° to 122 °F)
Overall Dimensions –  235 × 97 × 80 mm (9.25 × 3.8 × 3.14 in)
Weight (without Mount and Remote Control)  – 0.91 kg (2 lbs)
Warranty  – 2 Years

 

Converts your daytime scope, sight, or binoculars into night vision devices
Mounts in front of any day scope with no Re-Zeroing required
Powered by a single AA or cr123a battery
Wireless remote Control
Bright light cut-off System
Manual gain control
Simple and quick conversion of daytime scope to night vision
Mounts in front of any daytime scope with no rezeroing required
Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery
No export outside of the US